thomson speedtouch setup - routed config example/ all models

1. open up your web browser and type in 192.168.1.254 in the address bar at the top and hit enter. this will open up the speedtouch home page (hint: good idea to set your nic card to 192.168.1.xxx and gateway to 192.168.1.254 and use default netmask!)

2. click on the speedtouch menu on the left

3. scroll down to the bottom of the page and click on the set up link

4. a new page will open up. click next

5. select routed PPP and click next

6. make sure that the vpi/vci is 0.35 for the bell network and 0.33 for telus (your isp can tell you which setting to use)

7. enter in your user name, password and confirm password and click next

8. you can either enter in a password here or leave it blank and click next

9. click on start

10. now we wait...

11. click on finish

12. we are done! enjoy high speed.(you can then set your nic card back to dhcp if you changed it as above)